Karcher HD 13/18-4S PLUS

Upright cold water high-pressure cleaner. Servopress for adjustment of pressure and water flow rate directly on the trigger gun, pressure switch control, Easy-Press trigger gun with soft grip surface, pivoting stainless steel spray lance, detergent tank, separate compartment for nozzles.

Technical data Number of current phases (Ph)   3 Frequency (Hz)   50 Voltage (V)   400 Water flow rate (l/h)   650 - 1300 Operating pressure (bar/MPa)   30 - 180 / 3 - 18 Max. pressure bar   198 Max. water feed temperature (°C)   up to 60 Connected load (kW)   9.2 Weight (kg)   62 Dimensions (L x W x H) (mm)   560 x 500 x 1090 Detergent tank (l)   6

Standard accessories

Trigger gun Easy Press, Trigger gun with soft grip, High-pressure hose 10 m Longlife, Spray lance 1050 mm, Triple nozzle/Power nozzle manuell, Triple nozzle (0°/25°/40°) manuell, Dirt Blaster, Anti-twist system (AVS), 4-pole three-phase motor with air and water cooling, Pressure switch control, Stainless steel spray lance 1050 mm, Large fine mesh water filter, Electronic motor protection system with LED display, Oil sight glass, Servo Control, Brass water inlet fitting

Description
The three-phase HD 13/18-4 S Plus cold water high-pressure cleaner is user friendly and offers an operating pressure of 180 bar at a maximum throughput rate of 1300 l/h.

Thanks to its upright construction, the HD 13/18-4 S Plus takes up less space than a conventional machine and is much easier to manoeuvre, especially up and down steps and stairs. Its large diameter, rubber-tyred wheels ensure maximum mobility even in difficult terrain. The push handle adjusts to the most comfortable height for the user. Accessories that are not in use can be kept safely in a separate nozzle compartment.

The Easy-Press trigger gun offers a high degree of user comfort since it requires less effort to hold and operate and features a servopress controller for convenient adjustment of pressure and water flow rate. The spray lance can be pivoted through 360° while operating at full pressure. Other features are the pressure switch control, which turns off the pump as soon as the trigger is released and thus extends the service life of the motor and pump, and the electronic monitoring system for the motor and pump unit. The built-in detergent tank has a capacity of 6 litres.

The HD 13/18-4 S Plus has been designed for tough daily operating conditions. The chemical-resistant brass cylinder head and ceramic pistons with ceramic sleeves are combined with an efficient air-water cooling system to guarantee a long service life.

Application
On farms and building sites.
Removes heavy soiling quickly, thoroughly and economically
while providing exceptional operator comfort.

Features & Benefits
0°/25°/40° triple nozzle with touchless changeover
Quick changeover from high-pressure pencil jet to 25° high-pressure fan jet, manual changeover to 40° fan jet for detergent intake and application in low-pressure mode.

6-litre detergent tank with infinitely variable metering valve and additional nozzle compartment
Detergent available anywhere at any time, economic consumption as a result of precise metering, triple nozzle or Dirt Blaster safely accommodated on machine

Brass cylinder head with ceramic pistons and safety valve
High grade materials for a long service life, machine is protected against overload

Easy Press Trigger Gun
can be held and operated with greatly reduced effort

Detergent injector
Detergent applied in low-pressure mode by simply changing setting on triple nozzle

Electronic motor protection system with LED display
Leakage, over/undervoltage and other operating conditions are monitored and indicated and the machine is shut down automatically in the event of a fault.

Endurance tested, 4-pole three-phase motor (1400 rpm) with a combination of air and water cooling and motor protection switch
Powerful drive unit with optimized motor cooling and overload cut-out, good intake performance, long life

Kärcher Dirt Blaster
Rotating solid pencil jet for removing really stubborn dirt and stains, high area coverage combined with maximum dirt dissolving power

Large rubber tyred wheels and support stand with rubber buffer
Excellent mobility even on rough surfaces and up and down steps, rock steady in operating position

Oil inspection glass in machine cover
Pump oil level can be checked quickly and easily

One-piece motor/pump housing
Very quiet, compact construction

Pressure switch control
Direct on/off control via trigger gun, exceptional reliability, extended pump life